招生动态

招生动态

李翔

副教授
工业智能与系统研究所


教育背景


2002年9月至2006年7月 北京理工大学光电工程系,学士

2006年9月至2008年7月 北京理工大学光电工程系,硕士

2008年8月至2013年6月 新加坡南洋理工大学电子与电气工程学院,博士


工作履历


2012年8月至2015年2月 新加坡南洋理工大学,博士后

2015年2月至2016年8月 新加坡国立大学,博士后

2016年8月至2019年6月 香港中文大学,研究助理教授

2019年6月至今 清华大学自动化系,副教授


学术兼职


IEEE Senior Member, since 2022

Associate Editor, IEEE Transactions on Automation Science and Engineering, since 2023

Associate Editor, IEEE Robotics and Automation Letters, since 2022

Associate Editor, IEEE Robotics and Automation Magazine, 2019 – 2021

Associate Editor, IEEE International Conference on Robotics and Automation (ICRA), 2019 – 2021, 2024-2025



研究领域


灵巧操作、人机交互、外骨骼机器人、微型机器人、多智能体


研究概况


科技创新2030 -“脑科学与类脑研究”重大项目:类脑仿生智能无人系统,课题负责人,2021.12-2026.11

国家自然科学基金 - 联合基金重点项目:基于意图引导和轨迹定制的上肢绳牵引智能康复机器人研究,项目负责人,2022.1-2025.12

国家自然科学基金 - 面上项目:面向灵巧微操作的光镊机器人研究,项目负责人,2021.1-2024.12

Hong Kong RGC GRF (14200319), "Shape Control and Task Planning for Robotic Manipulation of Deformable Linear Objects", Jan. 1, 2020 - Dec. 31, 2022, PI (awarded)

国家自然科学基金 - 青年基金项目:面向外骨骼机器人的动态阻抗控制方法,项目负责人,2019.1-2021.12

深圳科创委 - 基础研究重点项目:工业机械臂的自治柔性操作技术研究,项目负责人,2018.2-2022.8

香港创新科技署项目:用于打磨木盒表面涂层的机器人系统开发,项目负责人,2018.3-2019.2

香港创新科技署项目:室内装修机器人关键技术研究,项目负责人,2018.1-2019.12

香港创新科技署项目:用于自动化焊接柔性印刷电路板和USB线缆的视觉反馈机器人,项目负责人,2017.11-2019.4


奖励与荣誉


2024: 1st Place at ICRA RGMC - in-hand subtrack and Most Elegant Solution

2024: ICRA Best Medical Robotics Paper Finalist

2023: T. J. Tarn Best Paper Finalist at ROBIO

2023: 2nd Place at ICRA Virtual Manipulation Challenge

2023: Best Paper Award at ICRA DOM Workshop

2022: 3rd Place in ICRA RoboMaster University Sim2Real Challenge

2018: T. J. Tarn Best Paper at ROBIO

2017: IROS Best Application Paper Finalist

2017: Best Paper in Robotic Control in the 18th International Conference on Advanced Robotics

2013: Highly Commended Paper Award in the third IFToMM International Symposium on Robotics and Mechatronics



学术成果



专著:

C. C. Cheah and X. Li, Task-Space Sensory Feedback Control of Robot Manipulator, Springer, 2015.


部分期刊论文:

Y. Chen, S. Miao, G. Chen, J. Ye, C. Fu, B. Liang, S. Song, and X. Li, “Learning to assist different wearers in multitasks: Efficient and individualized human-in-the-loop adaptation framework for lower-limb exoskeleton,” IEEE Transactions on Robotics (TRO), 2024, in press.

M. Yu, K. Lv, C. Wang, Y. Jiang, M Tomizuka, and X. Li, “Generalizable whole-body global manipulation of deformable linear objects by dual-arm robot in 3-D constrained environments,” The International Journal of Robotics Research, 2024, in press.

X. Yan, Y. Jiang, C. Chen, L. Gong, M. Ge, T. Zhang, and X. Li, “A complementary framework for human-robot collaboration with a mixed AR-haptic interface,” IEEE Transactions on Control Systems Technology, (Regular Paper), 32(1):112-127, 2024.

M. Yu, K. Lv, H. Zhong, S. Song, and X. Li, “Global model learning for large deformation control of elastic deformable linear objects: An efficient and adaptive approach,” IEEE Transactions on Robotics (TRO), 39(1):417-436, 2023.

F. Liu, F. Sun, B. Fang, X. Li, S. Sun, and H. Liu, “Hybrid robotic grasping with a soft multimodal gripper and a deep multistage learning scheme,” IEEE Transactions on Robotics (TRO), 39(3):2379-2399, 2023.

Y. Huo, Xiang Li, X. Zhang, Xiu Li, and D. Sun, “Adaptive intention-driven variable impedance control for wearable robots with compliant actuators,” IEEE Transactions on Control Systems Technology, (Regular Paper), 31(3):1308-1323, 2023.

Y. Gao, Z. Chen, Y. Ling, J. Yang, Y.-H. Liu, and X. Li, “A hierarchical manipulation scheme for robotic sorting of multiwire cables with hybrid vision,” IEEE/ASME Transactions on Mechatronics, (Regular Paper), 28(2):860-872, 2023.

Xiang Li, X. Zhang, Xiu Li, J. Long, J. Li, L. Xu, G. Chen, and J. Ye, “BEAR-H: An intelligent bilateral exoskeletal assistive robot for smart rehabilitation,” IEEE Robotics & Automation Magazine, 29(3):34-46, 2022.

J. Zhu, A. Cherubini, C. Dune, D. Navarro-Alarcon, F. Alambeigi, D. Berenson, F. Ficuciello, K. Harada, J. Kober, X. Li, J. Pan, W. Yuan, and M. Gienger, “Challenges and outlook in robotic manipulation of deformable objects,” IEEE Robotics and Automation Magazine, 29(3):67-77, 2022.

Y. Huo, P. Li, D. Chen, Y.-H. Liu, and X. Li, “Model-free adaptive impedance control for autonomous robotic sanding,” IEEE Transactions on Automation Science and Engineering, (Regular Paper), 19(4):3601-3611, 2022.

X. Li, Y.-H. Liu, and H. Yu, “Iterative learning impedance control for rehabilitation robots driven by series elastic actuators,” Automatica, 90:1-7, 2018.

X. Li, X. Su, and Y.-H. Liu, “Vision-based robotic manipulation of flexible PCBs,” IEEE/ASME Transactions on Mechatronics, (Regular Paper), 23(6):2739-2749, 2018.

X. Li, Y. Pan, G. Chen, and H. Yu, “Continuous tracking control for a compliant actuator with two-stage stiffness,” IEEE Transactions on Automation Science and Engineering, (Regular Paper), 15(1):57-66, 2018.

X. Li, Y. Pan, G. Chen, and H. Yu, “Multi-modal control scheme for rehabilitation robotic exoskeletons,” The International Journal of Robotics Research, 36(5-7):759- 777, 2017.

X. Li, Y. Pan, G. Chen, and H. Yu, “Adaptive human-robot interaction control for robots driven by series elastic actuators,” IEEE Transactions on Robotics, (Regular Paper), 33(1):169-182, 2017.

X. Li and C. C. Cheah, “Stochastic optical trapping and manipulation of micro object with neural-network adaptation,” IEEE/ASME Transactions on Mechatronics, (Regular Paper), 22(6):2633-2642, 2017.

X. Li, C. C. Cheah, and Q. M. Ta, “Cooperative optical trapping and manipulation of multiple cells with robot tweezers,” IEEE Transactions on Control Systems Technology, (Regular Paper), 25(5):1564-1575, 2017.

X. Li and C. C. Cheah, “A simple trapping and manipulation method of biological cell using robot-assisted optical tweezers: Singular perturbation approach,” IEEE Transactions on Industrial Electronics, (Regular Paper), 64(2):1656-1663, 2017.

X. Li, G. Chi, S. Vidas, and C. C. Cheah, “Human-guided robotic co-manipulation: Two illustrative scenarios,” IEEE Transactions on Control Systems Technology, (Regular Paper), 24(5), 1751-1763, 2016.

X. Li and C. C. Cheah, “Tracking control for optical manipulation with adaptation of trapping stiffness,” IEEE Transactions on Control Systems Technology, (Regular Paper), 24(4):1432-1440, 2015.

X. Li and C. C. Cheah, “Adaptive neural network control of robot based on a unified objective bound,” IEEE Transactions on Control Systems Technology, (Regular Paper), 22(3):1032-1043, 2014.

X. Li and C. C. Cheah, “Robotic cell manipulation using optical tweezers with unknown trapping stiffness and limited field of view,” IEEE/ASME Transactions on Mechatronics, (Regular Paper), 20(4):1624-1632, 2014.

C. C. Cheah, X. Li, X. Yan, and D. Sun, “Observer based optical manipulation of biological cells with robotic tweezers,” IEEE Transactions on Robotics, (Regular Paper), 30(1):68-80, 2014.

C. C. Cheah, X. Li, X. Yan, and D. Sun, “Simple PD control scheme for robotic manipulation of biological cell,” IEEE Transactions on Automatic Control, 60(5):1427-1432, 2014.

X. Li, C. C. Cheah, S. Hu, and D. Sun, “Dynamic trapping and manipulation of biological cells with optical tweezers,” Automatica, (Regular Paper), 49(6):1614-1625, 2013.

X. Li and C. C. Cheah, “Global task-space adaptive control of robot,” Automatica, (Regular Paper), 49(1):58-69, 2013.